5. remote voltage/amperage control – Miller Electric Big Blue 400 KX User Manual

Page 34

Advertising
background image

OM-4423 Page 28

6-5. Remote Voltage/Amperage Control

1

Remote 14 Receptacle RC14

Connect optional remote control to RC14 (see

Section 5-9).

.

When a remote control is connected to the
Remote receptacle, the Auto Sense Re-

mote feature automatically switches volt-

age/amperage control to the remote con-

trol. When a device is connected to the Re-

mote receptacle, remote voltage/amper-

age control is always available regardless

of the position of the Process/Contactor

switch.

0774 / Ref. 217 358-B / Ref. 803 576−C

Adjust Optional Remote Control

Set V/A Control

To Desired Maximum

Weld Output Using Weld

Meters

Set TIG or STICK Process

Adjust Optional Remote

Control To Desired Weld

Output

In Example:

Process = Remote Stick

Min = 20 A DC

Max = 205 A DC

Max (205 A DC)

Min (20 A DC)

Connect Remote

Control To Remote

Receptacle RC14

Connect Remote

Control To Remote

Receptacle RC14

Set WIRE Process

1

Adjust Optional Remote

Control to 100%

Weld meters will always

show the combined main and

remote control setting and

machine welds at nominal

output settings of the meter.

Weld meters show preset

output when not welding.

Advertising