Miller Electric XMT 350 VS - Manual (Page 3)

2
3
1
5
6
7
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
CC
FCAW
4
8
3
1. Voltmeter
2. Remote Control Receptacle
3. Process Selector Switch (Rotary Switch)
4. Optional Gas Valve
5. Ammeter
6. Voltage/Amperage Adjustment Control
7. Arc Control (FCAW Setting for
Flux-Cored Welding)
8. Power On/Off Switch
2
3
1
4
5
6
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
7
XMT ® 350 VS Control Panel
XMT ® 350 CC/CV Control Panel
Additional Features
Low OCV Stick. A built-in, selectable
feature, that reduces the Stick mode
open-circuit voltage (OCV) to nearly
15 volts when the welding power source
is not in use. Eliminates the need for
add-on voltage reducers.
Note: VS model is available only with
Tweco-style weld cable disconnects. Tweco
cable connectors are not supplied with the
unit and must be ordered separately.
Optional 115 VAC auxiliary power is not
available on VS model.
Pulsed MIG (GMAW-P) capability is not
available on VS model.
Additional Features
Auto Remote Sense ™ enables unit to
automatically use remote control if
connected to remote control receptacle.
Low OCV Stick. A built-in, selectable
feature, that reduces the Stick mode
open-circuit voltage (OCV) to nearly
15 volts when the welding power source
is not in use. Eliminates the need for
add-on voltage reducers.
Dinse- or Tweco-style weld disconnects
provide high-quality weld cable connections.
Optional 115-VAC auxiliary power provides
10 amps of circuit-breaker-protected power
for water circulators, etc.
Pulsed MIG (GMAW-P) capabilities with
optional Optima
™ control reduces spatter
and distortion, allows better out-of-position
puddle control, and provides potential
reduction of fume particle emission.
1. Voltmeter
2. Process Selector Switch (Rotary Switch)
3. Optional Gas Valve
4. Ammeter
5. Voltage/Amperage Adjustment Control
6. Arc Control (FCAW Setting for
Flux-Cored Welding)
7. Power On/Off Switch
Note: VS model is equipped with Tweco-style
output connector.