Miller Electric XMT 350 VS - Manual (Page 5)

5
Optima ™ #043 389
A multipurpose,
microprocessor-based
pulse control for both
synergic MIG (wire
welding or GMAW) or
manual MIG pulsing.
Use this control with the
XMT CC/CV power
sources and any Miller wire feeder, including
automatic feeders and spool guns. Includes
a 25-foot (7.6 m) cord with 14-pin plug.
(Not for use with XMT VS model.)
Extension Cords for Optima
#242 205 025 25 ft. (7.6 m)
#242 205 050 50 ft. (15 m)
#242 205 080 80 ft. (24.3 m)
WC-24 Weld Control
#137 549
Designed for use
with Miller CV power
sources supplying
24 VAC and 14-pin
receptacles. For use
with Spoolmatic 30A
spool gun.
HF-251D-1 High-Frequency Arc Starter
and Stabilizer #042 388
Portable 250-amp, 60-percent duty cycle
unit adds high frequency to the welding
circuit to help start the arc when using the
DC TIG (GTAW) process. Operates on 115
VAC, 50/60 Hz. See Lit. Index No. AY/5.1.
Wireless Remote Foot Control #300 429
For remote current and contactor control.
Receiver plugs directly into the 14-pin
receptacle of Miller machine. 90-foot
(27.4 m) operating range.
Wireless Remote
Hand Control
#300 430
For remote current
and contactor control.
Receiver plugs directly
into the 14-pin receptacle of Miller machine.
300-foot (91.4 m) operating range.
RFCS-14 Foot Control
#043 554
Foot current and
contactor control.
Includes 20-foot (6 m)
cord and 14-pin plug.
RHC-14 Hand Control*
#242 211 020
20-foot (6 m) cord
#242 211 100
100-foot (30.5 m) cord
Miniature hand control for remote current
and contactor control. Dimensions: 4 x 4 x
3.25 inches (102 x 102 x 82 mm). Includes
cord and 14-pin plug.
*Custom lengths available in 5-foot increments up to
50 feet and 10-foot increments up to 100 feet.
RMLS-14 #129 337 14-pin plug
Momentary- and maintained-contact rocker
switch for contactor control. Push forward for
maintained contact and back for momentary
contact. Includes 20-foot (6 m) cord.
RCC-14 Remote Contactor and Current
Control #151 086 14-pin plug
Rotary-motion fingertip control fastens to
TIG torch using two Velcro
® straps.
Includes 26.5 foot (8 m) control cord.
RCCS-14 Remote Contactor and Current
Control #043 688 14-pin plug
Up-and-down rotary-motion fingertip
control. Great for applications that require
a finer amperage control. Includes 26.5-foot
(8 m) control cord.
Extension Cables for Remote Controls
and 24 VAC Wire Feeders*
#242 208 025 25 ft. (7.6 m)
#242 208 050 50 ft. (15 m)
#242 208 080 80 ft. (24.3 m)
14-pin plug to 14-pin socket. Not for use
with Optima or XR-AlumaFeed feeder.
*Custom lengths available in 5-foot increments up to
50 feet and 10-foot increments up to 100 feet.
Running Gear
MIGRunner ™ Cart #195 445
Running Gear Cylinder Rack
#300 408 For dual feeders
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles.
XMT Cylinder Cart
#042 537
Carries two
160-pound
(72.6 kg) gas
cylinders, or one
gas cylinder and
one coolant
system for TIG
(GTAW) welding. Feeder mounts to tray
above power source.
Universal Carrying
Cart and Cylinder
Rack #042 934
Holds power
source, and
gas cylinder
up to 56 inches
(142.2 cm) high measuring 6 to 9 inches
(15.2 to 22.8 cm) in diameter.
Genuine Miller ® Accessories
#300 408
#195 445