Miele DA 217-2 - Manual (Page 19)

Changing a light tube
Disconnect the cooker hood from
the mains supply. Ensure that:
– it is switched off at the wall socket
and the plug has been withdrawn
(do not pull on the cable, only on
the plug), or
– the fuse has been withdrawn from
the fused spur connection unit, or
– the mains fuse is withdrawn; or
– the screw-out fuse is removed (in
countries where this is applicable).
Unscrew the fixing screw of either
the right or left hand holder for the
glass cover.
When doing this, push the glass
cover upwards so that it does not fall
on the hob surface.
Take off the glass cover holder.
Then take out the glass cover, guid-
ing it downwards at an angle.
Carefully lower the light tube down-
wards and pull out.
Change the light tube and push
back upwards into place.
Put the glass cover back in place
and secure with the glass holder.
Cleaning and care
19