Miele DA 217-2 - Manual (Page 26)

At a maximum distance of 365 mm
from the ceiling, hold retaining plate
C against the wall and use the not-
ches to align it with the middle line.
Mark the two drill holes.
Drill two 8 mm ø holes into the wall
and press the S8 plugs into the
holes.
Screw on retaining plate C with two
5 x 40 mm screws.
Canopy
Before fitting the canopy the glass
cover of the lighting tube must first
be removed (see relevant section in
"Cleaning and care").
Hang the canopy on the angle
brackets on retaining plate A.
Secure the canopy. Secure the ca-
nopy with 5 x 40 mm screws into
each drilled hole.
DA 216-2 / EXT, 217-2:
Secure the canopy with a 5 x 40 mm
screw.
DA 219-2 / EXT:
Secure the canopy with two
5 x 40 mm screws.
Replace the glass cover.
Installation
26