Miele DA 217-2 - Manual (Page 9)

b Extension piece
c Tower
d
Canopy
e Control panel
f
Main switch
g Recirculation grilles
h
Hob lighting
i Grease filters
j Touch control for
the hob lighting
k
On-Off touch control for
the fan
l
Controls to select the
Fan power level
m Touch control for
the run-on option
This control activates the run-on option.
The fan is switched off automatically
after either 5 or 15 minutes.
n
Touch control for the
grease filters
The indicator light above the grease
filter touch control lights up when the
grease filters need to be cleaned.
The touch control is used:
– to reset the operating hours counter
after cleaning the grease filters (see
"Cleaning and Care").
– to show how long the grease filter
has been in use (see section on
"Operation / Filter operating hours
counter").
– to alter the number of hours counted
by the filter operating hours counter
(see section "Operation / Altering the
filter operating hours counter").
o
Touch control for
the active charcoal filters
The indicator lamp above the active
charcoal filter touch control lights up
when the recirculation mode active
charcoal filters need to be replaced.
The touch control is used:
– to reset the operating hours counter
after replacing the active charcoal
filters (see "Cleaning and Care").
– to show how long the active charcoal
filters have been in use (see section
on "Operation / Filter operating hours
counter").
– to alter the number of hours counted
by the filter operating hours counter
(see section "Operation / Altering the
filter operating hours counter").
Description of the appliance
9