Installation – Miele DA 217-2 User Manual
Page 23
b
2 recirculation grilles
(for recirculation mode only)
c
2 protective sheets
for use when fitting the tower.
d
1 protective sheet
for use when fitting the tower.
e
1 directional unit
(for recirculation mode only)
f
1 flexible aluminium hose
for con-
necting the directional unit to the ex-
haust socket on the motor unit (not on
EXT models).
g
2 hose clips
for securing the ex-
haust ducting.
h
1 reducing collar
for exhaust ducting ø 125 mm (not on
EXT models).
i
1 non-return valve
for fitting into the
exhaust socket on the motor unit (for ex-
traction mode only, not on EXT models).
j
1 exhaust connection
for fitting in
the canopy (only with EXT models).
k
Upper retaining plate B
for secur-
ing the extension piece.
l
Middle retaining plate C
for addi-
tional stability of the tower.
m
Lower retaining plate A
for secur-
ing the canopy and the motor unit.
12 large headed screws 5 x 40 mm
and
12, S 8 plugs
for securing the retaining
plates and the canopy.
2 M 6 locking nuts
for securing the
motor unit/control unit.
4 screws 3.9 x 7.5 mm
for securing
the tower and the extension piece.
4 screws 4.2 x 13 mm
for securing
the exhaust socket in the canopy (only
with EXT models).
Installation
23