Multi-Tech Systems MVP200 - Manual (Page 22)

MultiVOIP Quick Start Guide
22
Note: After configuring a given channel, you can copy
that channel’s configuration to any other channel by
clicking Copy. Everything on the Voice/Fax tab will be
copied to the other channel.
19. The Billing/Security tab displays the parameters for
automatic disconnection, billing options, and dialing
options.
20. You can set up billing options for inbound and outbound
calls by selecting them in the Billing Options group and
then entering the charge in cents per number of
seconds.
21. The Call Authentication option enables password
protection for outbound and inbound calls on the
selected voice/fax channel. If you enable password
protection on inbound or outbound calls, you need to
also enter a password of up to 14 numeric characters in
the Password box.
22. The Automatic Disconnect option limits call duration to
the number of seconds entered in the Disconnect After
box. The default value of 180 seconds can be changed
to any other value up to 65,535 (roughly 18.2 hours).