Multi-Tech Systems MVP200 - Manual (Page 28)

MultiVOIP Quick Start Guide
28
37. The Checking MultiVOIP dialog box displays.
Click OK to proceed.
38. After the setup is written to the MultiVOIP, the unit is
rebooted.
39. Verify that the BOOT LED on the MultiVOIP is off after
the download is complete. This may take several
minutes as the MultiVOIP reboots.
40. You are returned to your MultiVOIP folder which is open
and visible on your desktop.
At this time, your host MultiVOIP is configured. Proceed to
the next section to configure the client MultiVOIPs.