Multi-Tech Systems MVP200 - Manual (Page 36)

MultiVOIP Quick Start Guide
36
In the Database Type group, click the Client option. The
Update Database From group becomes active.
17. Enter the IP address of the host MultiVOIP in the Host IP
Address box.
18. Click OK and you are returned to the main menu.
19. Click Download Setup to write the new configuration to
the client unit. The Save Setup dialog box displays.
20. Select the Save Current Setup as User Default
Configuration check box and click OK. After the setup is
written to the MultiVOIP, the unit reboots.
22. Check that the Boot LED on the MultiVOIP is off after the
download is complete. This may take several minutes as
the MultiVOIP reboots.
23. You are returned to the main menu.
Your MultiVOIP is operational at this time.