Miller Electric 400 - Manual (Page 6)

6
Genuine Miller ® Accessories
Full KVA Plug Kit #119 172 Field
1-phase, 120/240 VAC, 50 A plug
(NEMA 14-50P) to fit full KVA
receptacle.
Engine Filter Kit
#246 988 Field. For Deutz
#246 985 Field. For Perkins
Includes all filters required for proper
engine maintenance. Oil filter, primary and
secondary fuel filter, and primary air filter.
Spark Arrestor
Muffler Kit
#195 012 Field
Prevents particles
from leaving the muffler that could
potentially start a fire. Mandatory when
operating on California grasslands, brush,
or forest-covered land, and in all National
Forests. For other areas, check your state
and local laws. Meets U.S. Forest Service
standard 5100-1B.
FA-1D Lockable Flame Arrestor
Fuel Cap #043 947 Field
Fuel cap can be padlocked to
prevent vandalism. A built-in
flame arrestor prevents flames or
sparks from entering the fuel tank.
Vandalism Lockout Kit
#195 118 Field
Lockable hinged steel
panels cover and protect
name plate gauges and
ignition switch (padlock
included). Also includes
engine compart ment door
lock and key.
Cable Holder
#043 946 Field
Saddle-bag-style cable
holder. Convenient wrap-
around storage of coiled
cable for transportation.
Stores 100 feet of 2/0
cable on each side.
Note: For best results do not weld when cable is coiled!
Protective cover cannot be used with cable holder.
Protective Cover
#194 683 Field
Blue water-resistant
canvas cover resists
stains and mildew,
and protects the
finish of your welder.
Note: Protective cover cannot be used with cable holder.
Stick (SMAW) Welding
Weld Leads
2/0 Stick Cable Set, 50 ft. (15 m)
#173 851
Consists of 50-foot (15 m) 2/0 electrode
cable with holder, and 50-foot (15 m) work
cable with clamp. 350 A, 100% duty cycle.
2/0 Stick Cable Set, 100/50 ft. (30.5/15 m)
#043 952
Consists of 100-foot (30.5 m) 2/0 electrode
cable with holder, and 50-foot (15 m) work
cable with clamp. 300 A, 100% duty cycle.
MIG (GMAW) or Flux-Cored (FCAW)
SuitCase ® X-TREME ™ 8VS Wire Feeder
#951 182
SuitCase
® X-TREME ™ 12VS Wire Feeder
#951 184
Lightweight, voltage-sensing wire feeders
include secondary contactor, gas valve and
drive roll kit. See Lit. Index No. M/6.41.
SuitCase ® 8RC Wire Feeder #951 186
SuitCase ® 12RC Wire Feeder #951 188
Lightweight and flexible enough to run a
variety of wires up to .062-inch diameter.
Includes remote voltage control and drive
roll kit. See Lit. Index No. M/6.5.
MIG (GMAW)/Flux-Cored (FCAW) Guns
Miller produces a complete line of
dependable MIG guns. See Lit. Index Nos.
AY/15.0, AY/16.0 and AY/17.0.
Spoolmatic ® 30A
Spool Gun
#130 831
Air-cooled, 200-amp,
1-pound spool gun
for aluminum MIG. See Lit. Index No. M/1.73.
WC-24 Control #137 549
Use with Spoolmatic 30A.
XR ™ Wire Feeders and Guns
Push-pull system designed to handle
difficult-to-feed soft alloy wires such as
aluminum. See Lit. Index No. M/1.7,
M/1.71, and M/1.73.
TIG (GTAW) Welding
Dynasty ® 200 Series
For premium portable
AC/DC TIG arc quality.
See Lit. Index No.
AD/4.8.
HF-251 Series
#042 388
HF-251D-1, 115 VAC
#042 387
HF-251D-2, 230 VAC
High-frequency arc
starter and stabilizer.
See Accessory Lit. Index No. AY/5.0.
Plasma Cutting
Spectrum 375 X-TREME and 625 X-TREME shown.
Spectrum ® 375 X-TREME ™ #907 529
See Lit. Index No. PC/9.2.
Spectrum
® 625 X-TREME ™ #907 531
See Lit. Index No. PC/9.6.
Spectrum
® 875 #907 390-01-1
See Lit. Index No. PC/9.8.
The Spectrum 375 X-TREME and 625
X-TREME come complete with protective
X-CASE
™ (not shown).