Door hanging – Maytag MDE9601 User Manual

Page 22

Advertising
background image

22

5. Next you must move the plastic plugs on

the upper and lower edges of the door. Use

a flat screwdriver.

6. Unscrew the two screws on the sides of

the door, around five millimetres, to allow

the door magnet and cover washer on the

inside of the door to be removed.

7. Then remove the door magnet (1) and

cover washer (2).

1

2

8. Insert the door magnet in place of the

cover washer.

The tumble dryer comes with the door hung

on the left. However, it is possible to change

the door to right hung.

Proceed as follows:

1. Remove the lower front plate and undo

the three screws holding the hinge attach-

ment.

2. Angle the lower edge of the door out to

the left while turning the hinge attachment

as indicated by the arrows.

3. Move the hinge pin. For right hanging,

the hinge attachment must then be turned

upside down.

4. Then move the hinge pin in

the panel’s lower edge.

Door hanging

Hinge attachment

Hinge pin

Advertising