Marantz SR5003 User Manual

Page 7

Advertising
background image

ENGLISH

4

BASIC

CONNECTIONS

BASIC OPERA

TION

ADV

ANCED

CONNECTIONS

SETUP

ADV

ANCED

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

OPERATION OF REMOTE CONTROLLER

REMOTE CONTROL

Operate the remote controller within a distance
of approx. 16.4ft. (5m) from the infrared receptor
window on the front of the unit.

Remote controller

SR5003

60°

Appro

x. 16.4ft.

(5 m)

Caution:

• Do not allow direct sunlight, an inverter fl uorescent

light or other strong source of light to shine onto
the player’s infrared receptor window. Otherwise,
the operation of the remote controller may be
disabled.

• Bear in mind that operating the remote controller

may cause other devices operated by infrared rays
to be operated by mistake.

• The remote controller cannot be operated if the

space between the controller and the player’s
infrared receptor window is obstructed.

• Do not place any objects on top of the remote

controller.

Doing so may cause one or more buttons to be

held down which will cause the batteries to run
down.

LOADING BATTERIES

Before using the remote controller for the fi rst time,
load the batteries in the remote controller. The
batteries provided are used to verify the operations
of the remote controller only.

1.

Remove the battery cover.

2.

Insert the new batteries (AAA type) with correct

ª and · polarity.

3.

Close the battery cover until it clicks shut.

CAUTIONS ON BATTERIES

• Use “AAA” type batteries in this remote controller.

• We recommend that you use alkaline batteries.

• If the remote controller does not operate from

close to the unit, replace the batteries with new
ones, even if less then a year has passed.

• The included battery is only for verifying operation.

Replace it with a new battery as soon as possible.

• When inserting the batteries, be careful to do so in

the proper direction, following the + and - marks in
the remote controller’s battery compartment.

• To prevent damage or battery fl uid leakage:

- Do not use a new battery with an old one.
- Do not use two different types of batteries.
- Do not short-circuit, disassemble, heat or

dispose of batteries in fl ames.

• Remove the batteries when not planning to use

the remote controller for a long period of time.

• If the batteries should leak, carefully wipe off the

fl uid from the inside of the battery compartment,
then insert new batteries.

• When disposing of used batteries, please comply

with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.

Advertising