MITSUBISHI ELECTRIC DX-TL4516U - Manual (Page 76)

73
Operations
Service Info System Menu
System Log List
This item is used to check the number, date, and time of the
system log.
Service Info 3
1 System Log List
System Menu
step 1. Check the system log in the <System Log List>.
• The <System Log List> displays up to 1000
items. When the number of items exceed this
limit, the latest 1000 items are displayed.
When a failure occurs while the <System Log List> is be-
ing displayed, exit the screen and display it again. A new
item is added to the list.
“REC ON” is registered to system log list when the record-
ing is started, but it is not registered when the recording is
resumed after a power failure.
See page 108 for the details of the listed log.
<Operational log>
Recording (front panel) .............. REC ON/REC OFF
Recording (rear panel) ............... REC EXT ON/
REC EXT OFF
Recording (communication) ....... REC COM ON/
REC COM OFF
Simple lock ................................ PS-E
Password lock ............................ PS-1, PS-2, PS-3
Cancelling lock ........................... PS-OFF, PS-4
Displaying menu ........................ MENU ON
Exiting menu .............................. MENU OFF
Alarm recording disabled ........... ALM OFF
Alarm recording enabled ............ ALM ON
Power failure .............................. P-LOSS
Reset ......................................... RESET
Communication .......................... Name of log in user
Elapsed Operating Time
This item is used to check the total operating time of the
system, copy 1, or copy 2 device.
Service Info 3
2 Elapsed Operating Time
System Menu
step 1. Check the total operating time in the <Elapsed
Operating Time>.
“– – – – Hr”: The device is not registered for that
group.
Disk Information
This item is used to check the recording range of the main,
copy 1 or copy 2 device.
Service Info 3
3
1
D
D
D
2 to 4
5 to 7
steps 1, 2
Disk Information
Disk Information (Main)
Disk Detailed Information (Main)
Disk Detailed Information
(Copy 1 - S.Bus, DVD/CD,
USB Mem.)
Disk Detailed Information
(Copy 2 - S.Bus, DVD/CD,
Internal)
Disk Information
(Copy 1 - S.Bus, DVD/CD,
USB Mem.)
Disk Information
(Copy 2 - S.Bus, DVD/CD,
Internal)
System Menu
step 1. Select “Information” of the desired device in the
<Disk Information>.
“Alarm Area” appears when “Alarm Recording Area” (
page 77 “Change Partition Setting”) is set to other than “0
%.”
“LPA Area” appears when “Long Pre-Alarm Area” (
page 77 “Change Partition Setting”) is set to other than “0
%.”
step 2. Select “Detail” to check the detailed information of
the device set for each area.
• When selecting “Detail,” the information such as
connection name, manufacturer, name, and size
(GB unit) of the device are displayed.
• Before checking the latest information, display
<Memory> menu during stopping recording, and
check that the device is set correctly.