Changing the door hinging – Miele K 9557 iD User Manual
Page 39
^ Unscrew ball joint b using a
spanner, and remove soft-close
mechanism
c together with the ball
joint.
Do not separate the soft-close
mechanism from the ball joint. This
would damage the mechanism.
^ Stand the appliance door up, and
loosen the hinges at the front (the
hinges remain open).
^ Remove screws a, and use the
stoppers supplied
c to plug the
empty holes.
Do not close up the hinges. Danger
of inury.
^ Replace the hinges in their diagonally
opposite corners
b.
^ Use a powered screwdriver to secure
the hinges; screws
a are
self-tapping.
To secure the soft-close mechanism
^ Place the door with the outer side
downwards on a stable surface.
^ Screw ball joints b of soft-close
mechanism
c into the new fixing
holes.
^ Open out soft-close mechanism c,
and hook mounting
a onto the hinge.
^ Hold the soft-close mechanism in this
position, and screw mounting
a to
the hinge.
Changing the door hinging
39