Miele K 9557 iD - Manual (Page 46)

^ Hang the furniture door onto
adjusting bolts h.
^ Loosely attach nuts c on the
adjusting bolts
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align to match neigbouring doors if
necessary:
Side adjustments X are made by
sliding the furniture door, and height
adjustments Y by turning adjusting
bolts
h with a screwdriver.
^ Tighten nuts c.
Securing the appliance door to the
furniture door:
^ Screw fixing bracket a into the
pre-drilled holes in the appliance
door using hexagonal screw
b.
Make sure the two metal edges c
are aligned (Symbol
II).
^ Drill fixing holes d, and screw in the
4 x 14 mm screws e.
(On large or divided doors, attach a
second pair of fixing brackets
a in the
handle region of the door. Use the
pre-drilled holes in the appliance door.)
– Align depth Z on the furniture door:
Loosen screws f at the top of the
appliance door, and loosen the
hexagon-headed screw
g at the
bottom of the fixing bracket. By
moving the furniture doors, create a
gap of 2 mm between the furniture
doors and the front edge of the
niche.
Building in the appliance
46