Miele K 9557 iD - Manual (Page 44)

Securing the appliance in the
niche
^ Press the appliance against the wall
on the hinge side.
^ To fix the appliance to the housing
unit at the top and bottom:
– screw the long 4 x 19 mm chip board
screws a into the hinges at the top
and bottom,
– screw a long chip board screw b (4 x
19 mm) through the middle of the
long hole in the plastic bracket.
^ Close the plastic bracket.
^ Fit screw c through fixing bracket d.
^ Push the bracket towards the
housing unit side wall and tighten
screw
e.
^ Close the bracket f .
^ Close the appliance door.
Building in the appliance
44