Navigating the screens – Multi-Tech Systems MultiModem User Manual
Page 11
Chapter 2 – Getting Started
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375A)
11
Navigating the Screens
This section explains the menu structure and the navigation buttons.
Menu Bar
IP Setup:
Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote Configuration.
PPP:
Sets up the PPP authentication,
dial-on-demand, modem authentication, and Wakeup on Call.
Networks & Services:
Defines networks and services to make them available to other functions such as
allowed packet filters, DHCP Server, and Statistics & Logs.
Packet Filters:
Defines filter rules, DNAT configuration, and ICMP rules.
DHCP Server:
Configures the DHCP server settings.
Tools:
Sets DDNS Force Update and Reset Modem, displays Service Status, and provides screens for
Firmware Upgrade, Load Configuration, and Save Configuration.
Statistics & Logs:
View all the statistics and logs maintained by the modem.
Save & Restart:
Click this to Save your settings and reboot your PC.
Help Index:
Click this to access the Help text.
Screen Parts
Menu Bar Submenu Title Submenu List
Screen Buttons
Screen Name
Screen Input Area
Screen Buttons
Home:
Click this button to return to the Home screen.
Wizard Setup:
Click this button to display the Wizard Setup screen on which you can quickly set up your
wireless modem with basic configuration settings.
Logout:
Click this button to Logout and return to the login screen.
Help:
Click this button to display the Help text.
Submenus
The submenus display on the left side of the screen.
The following table shows the sub-menu selections under each main menu category.
IP Setup
PPP
Networks &
Services
Packet Filters DHCP Server
Tools
Statistics
& Logs
General Config.
HTTP Config.
DDNS Config.
SNTP Config.
Static Routes
Remote Config.
PPP Config.
Wakeup on Call
Network Configuration
Service Configuration
Packet Filters
DNAT Config.
Advanced
Subnet Settings
Fixed Addresses
Tools
Service Status
Firmware Upgrade
Load Config.
Save Config.
Ethernet
Serial
PPP
PPP Trace
SysInfo
DHCP Stat