Safety warnings, Ship kit contents, Application example – Multi-Tech Systems MultiModem User Manual
Page 6: Ethernet ports caution, Handling precautions, Safety recommendations for rack installations
Chapter 1 – Introduction and Product Description
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375A)
6
Safety Warnings
Ethernet Ports Caution
The Ethernet ports are not designed to be connected to a Public Telecommunication Network.
Handling Precautions
All devices must be handled with certain precautions to avoid damage due to the accumulation of static charge.
Although input protection circuitry has been incorporated into the devices to minimize the effect of this static build
up, proper precautions should be taken to avoid exposure to electrostatic discharge during handling and
mounting.
Safety Recommendations for Rack Installations
•
Ensure proper installation in a closed or multi-unit enclosure by following the recommended installation
as defined by the enclosure manufacturer.
•
If installing the wireless modem in a closed or multi-unit enclosure, ensure adequate airflow so that the
maximum recommended ambient temperature is not exceeded.
•
Do not place the device directly on top of other equipment or place other equipment directly on top of
this device.
•
Ensure that the device is properly connected to earth ground via a grounded power cord. If a power
strip is used, ensure that the power strip also provides adequate grounding.
•
Ensure that the main supply circuit is capable of handling the load. See the power label on the device
for requirements.
•
Maximum ambient temperature is 70 degrees Celsius.
•
This device should be installed by properly qualified personnel.
•
Only connect like circuits; e.g., connect SELV (Secondary Extra Low Voltage) circuits to SELV circuits
and TN (Telecommunications Network) circuits to TN circuits.
Ship Kit Contents
The wireless modem is shipped with the following:
•
One Multi-Tech wireless modem with Ethernet interface.
•
One power cord.
•
One external power supply.
•
One wireless modem antenna.
•
Four rubber feet for desktop placement.
•
One printed Quick Start Guide.
•
Printed Activation Customer Notices (for Cingular, Sprint, Verizon networks, and general CDMA
activation).
•
One product CD that provides documentation and Adobe Acrobat Reader.
Application Example