Matsui America DVDR100 - Manual (Page 26)

22
Initial OSD Settings
23
Initial OSD Settings
Password Setting [DVD]
You can change the password for your DVD recorder.
1
Press Setup in the stop mode to display the menus.
2
Press to select “SYSTEM” and press .
3
Press to select “Password” and press .
4
Enter your old password, and then press .
a a Input a 5-digit password with the number buttons.
Factory pre-set password : 99999
5
Enter your new password, and then press .
b b
Input a NEW 5-digit password with the number buttons.
6
Enter your new password again for confi rmation, and then press
.
c c
Input the same 5-digit password as in Step 5 with the number buttons.
If you input the wrong password, the following screen will appear:
Please then re-enter your password.
If you’ve forgotten your password, please select “Factory Reset“ to restore to
the default setting.
-To return to the Setup MENU screen
Press .
-To complete the setup operation
Press
Setup to exit from Setup MENU screen.
1-4
SYSTEM Setup
-continued
TUNING
RECORD/DISC
VIDEO
TIMER
SYSTEM
<SETUP> Exit
* Input 99999
* Input 5-digit numbers
* Input The Same
5-digit numbers
b b
c c
a a
3 3
4 4
5 5
6 6