Multi-Tech Systems Multimodem RJ-9 User Manual
Page 13
Chapter 2 – Getting Started
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)
13
Step 4. Important Prerequisite for
Activating a CDMA Account
If you are setting up you device for the GSM network (GPRS and EDGE devices), you can skip Steps 4 and 5,
and go to Step 6.
You must disable PPP Authentication in the Web Management Ethernet software:
1. Open a Web Browser
From the workstation, open a Web Browser.
2.
Type the default Gateway Address:
http://192.168.2.1
3. Login
After entering the Address, the Login screen displays.
•
Type the default User name: admin (all lower-case).
•
Type the default password: admin (all lower-case).
Note:
The User name and Password are case-sensitive (both must be typed in lower-
case). If Windows displays the AutoComplete screen, you may want to click No to tell
the Windows OS not to remember the password; this helps maintain PC security.
•
Click the Login button. The Web Management Home screen displays.
4.
Then select the Wizard Setup from under the Menu bar.
5.
On
the
Wizard Setup screen under the PPP Configuration section, disable PPP.
6.
Click
the
Submit button.
7.
In order for your settings to take effect, you must click the Save & Restart button located on the
Menu bar. Your PC will shut down and reboot.