Networks & services > service configuration – Multi-Tech Systems Multimodem RJ-9 User Manual
Page 38
Chapter 3 – Using the Web Management Software
Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)
38
Networks & Services > Service Configuration
On this screen you can specify the standard set of well known services available on the system. These services
enable the configuration of the user-defined services. The options to Delete or Edit a service after it has been defined
and added are available by using the table at the bottom of the screen.
Service Configuration
Enter the Name, Protocol, Source Port/Client, and Destination Port/Server for the new Service.
•
A Service Name cannot be edited.
•
A Service cannot be deleted if it is used in another configuration.
•
Service changes are reflected in all the configurations in the Web Management software where they are
used.
•
Services added here will be displayed in the following sections: DNAT, Packet Filters.
Name:
Enter the name of the Service. It has to be unique.
Protocol:
Enter the type of protocol (ITCP, UDP).
Source Port:
Enter the Source Port for this service.
Destination Port:
Enter the name of the Destination Port for the service.
Add Button:
Click
the
Add button. The new service is added and will display on the screen.