McDATA 4300 - Manual (Page 156)

A-16 McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
Event Code Tables
Event Code: 120
Message: Error detected while processing system management command.
Severity: Informational.
Explanation: This event occurs when the switch receives a management command that violates specified boundary
conditions, typically as a result of a network error. The switch rejects the command, drops the switch-to-server
Ethernet link, and forces error recovery processing. When the link recovers, the command can be retried.
Action: No action is required for an isolated event. If this event persists, perform a data collection and return the CD to
support personnel.
Event Data: No supplementary data included.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log
✔
Event Code: 121
Message: Zone set activation failed - zone set too large.
Severity: Informational.
Explanation: This event occurs when the switch receives a zone set activation command that exceeds the size supported by
the switch. The switch rejects the command, drops the switch-to-server Ethernet link, and forces error recovery
processing. When the link recovers, the command can be modified and retried.
Action: Reduce the size of the zone set to conform to the limit specified, then retry the activation command.
Event Data: No supplementary data included.
Distribution: Product Management Server Host
EFCM Basic
Event Log
System
Error LED
Event Log E-Mail Call-Home Sense Info Link Incident
Log
✔