McDATA 4300 - Manual (Page 69)

Maintenance Analysis Procedures 3-5
Maintenence Analysis Procedures
MAP 0000: Start MAP
This MAP describes initial fault isolation beginning at the:
• Failed product.
• Browser-capable PC with Internet connectivity to the firmware-
resident Enterprise Fabric Connectivity Manager (EFCM) Basic
Edition interface.
• Product-attached open systems interconnection (OSI) host
console.
1
Prior to fault isolation, acquire:
• A system configuration drawing or planning worksheet that
includes the location of the product, management interface,
other McDATA products, and device connections.
• The internet protocol (IP) address, gateway address, and subnet
mask for the product reporting the problem.
• User IDs and passwords.
Continue to the next step.
583 Loss of signal or loss of synchronization. Go to MAP 0500 .
584 Not operational primitive sequence received. Go to MAP 0500 .
585 Primitive sequence timeout. Go to MAP 0500 .
586 Invalid primitive sequence received for current link state. Go to MAP 0500 .
810 High temperature warning (CTP thermal sensor). Go to MAP 0400 .
811 Critically hot temperature warning (CTP thermal sensor). Go to MAP 0400 .
812 CTP card shutdown due to thermal violations. Go to MAP 0400 .
850 Switch shutdown due to CTP thermal violations. Go to MAP 0400 .
Table 3-3 Event Codes versus Maintenance Action (Continued)
Event
Code Explanation Action