Marantz SR3001 User Manual
Page 21
18
ENGLISH
5.
If you fi nish these setup, press the
3 or 4
cursor button to select “TO MAIN MENU” then
press the ENTER button to return the SETUP
MENU.
Or press the
1 or 2 cursor button to select
“EXIT” then press the ENTER button to exit the
SETUP MENU.
Notes:
• When a DTS-LD or DTS-CD is playing, this setup is
not available. This is to avoid noise being generated
from the analog input.
• If “Dx-AUTO” is selected and a DVD, compact disc
or LD is fast forwarded during playback, decoded
signals may produce a skipping sound. In such cases,
change the setting to DIGITAL.
• Same digital input function cannot be set. In this
case, the previous setting is set to ANALOG.
Same digital input number cannot be set in Digital
AUTO mode and Digital Fixed mode. For example,
D1AUTO and DIG.1 are not set at same time.
• The TUNER is fi xed to the analog input, and can not
be selected for any digital input.
2. SPEAKER SETUP
After you have installed the SR3001, connected all
the components, and determined the speaker layout,
it is now time to perform the settings in the Speaker
Setup menu for the optimum sound acoustics for your
environment and speaker layout.
Before you perform the following settings, it is
important that you first determine the following
characteristics:
2-1. SPEAKERS SIZE
When setting the speaker size in the SPEAKER
SIZE sub-menu, use the guidelines given below.
Large:
The complete frequency range for the channel you
are setting will be output from the speaker.
Small:
Frequencies of the channel you are setting
lower than approx. 100Hz will be output from the
subwoofer.
If the Subwoofer is set to “NONE” and the front
speakers are set to “Large,” then the sound may
be output from both the left and right speakers.
DTS
PURE DIRECT
AUTO
T.TONE
MENU OFF
SET UP/
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
ENTER
4.
5.
2.
5.
1.
3.
5.
SURROUND
D RECEIVER SR3001
DO
ES
EAKER
PURE
SETUP
DIRECT
SIMPLE
AUTO
HT-EQ
MENU
ENTER
DISPLAY
MEMORY
CLEAR
T-MODE
EXIT
BAND
MODE
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT
DISC 6.1
MT X 6.1
EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL
S
SR
LFE
4.
5.
2.
5.
1.
3.
5.
1.
Select “2.SPEAKER” in SETUP MENU with
3
or
4 cursor button,
2.
Press
the
ENTER button to enter the menu.
The fi rst sub-menu item is “2-1.Speakers Size”
setup.
3.
Press
3 or 4 cursor button to select the each
speaker.
4.
Press
1 or 2 cursor button to select the setting
of size to each speaker.
5.
If you fi nish these setup, press the
3 or 4
cursor button to select “NEXT”.
6.
Press
the
ENTER button to enter the next “2-2.
Speakers Distance” setup.
Or press the
1 or 2 cursor button to select
“EXIT” then press the ENTER button to exit the
SETUP MENU.
Or press the
1 or 2 cursor button to select “TO
MAIN MENU” then press the ENTER button to
return the SETUP MENU.
MENU STRUCTURE of Speakers Size setup
Speakers
Size
Select when a subwoofer is connected.
Select if the front speakers are large sized.
Select if the center speaker is small sized.
Select when a subwoofer is not connected.
Select if the front speakers are small sized.
Select if the center speaker is large sized.
Select if no center speaker is connected.
Select if no surround left and right speakers are connected.
Select if the surround left and right speakers are large sized.
Select if the surround left and right speakers are small sized.
YES
NONE
LARGE
SMALL
SMALL
L & R
CENTER
LARGE
NONE
SMALL
LARGE
NONE
SL & SR
Select if no surround back speaker is connected
Select if the surround back left and right speakers are connected
Select if the surround back speaker is connected
2CH
NONE
SB
Select if the surround back speaker(s) is large sized
This menu (SB SIZE) will not be displayed, if SB is set "NONE".
Select if the surround back speaker(s) is small sized
SMALL
LARGE
***
SB SIZE
Select this when the bass speaker is about 8cm(3 3/16inches)
Select this when the bass speaker is about 10cm(3 15/16inches)
Select this when the bass speaker is about 12cm(4 3/4inches)
80
100
120
LPF/HPF
SUBW
2-1. SPEAKERS SIZE
setup
1CH
MAIN MENU
exit SETUP
MENU
Speakers Distance
setup
TO MAIN
MENU
EXIT
NEXT
In this case, the audio signal is emitted form
the Surround back L output terminal.