Marantz SR3001 User Manual
Page 32
29
ENGLISH
7.1 CH INPUT LEVEL
This menu is to adjust the speaker levels for 7.1-
channel input sources.
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.
DTS
PURE DIRECT
AUTO
T.TONE
MENU OFF
SET UP/
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
ENTER
4.
5.
2.
5.
1.
3.
5.
SURROUND
D RECEIVER SR3001
DO
ES
EAKER
PURE
SETUP
DIRECT
SIMPLE
AUTO
HT-EQ
MENU
ENTER
DISPLAY
MEMORY
CLEAR
T-MODE
EXIT
BAND
MODE
DISP
MULTI
AUTO
TUNED
ST
V – OFF
NIGHT
PEAK
ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT
DISC 6.1
MT X 6.1
EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL
S
SR
LFE
4.
5.
2.
5.
1.
3.
5.
1.
Press
the
CH.SEL button on the remote to
enter this menu.
2.
Press
3 or 4 cursor button to select desired
channel.
3.
Using
the
1 or 2 cursor button, adjust the
volume level of each channel.
+10dB
+9dB
-9dB
Minimum
Maximum
1 dB interval
Reference
1 dB interval
-10dB
button
button
0dB
Notes:
• When no operation is taken for 5 seconds, the level
setup mode will be cancelled.
• The condition of these setup will be memorized to
7.1CH INPUT source.
MENU STRUCTURE of 7.1CH INPUT LEVEL setup
7.1-L
7.1-C
7.1-R
7.1-SR
7.1-SBR
7.1-SBL
7.1-SL
7.1-SW
>-10>…>0>…>+10dB
>-10>…>0>…>+10dB
>-10>…>0>…>+10dB
>-10>…>0>…>+10dB
>-10>…>0>…>+10dB
>-10>…>0>…>+10dB
>-10>…>0>…>+10dB
>-15>…>0>…>+10dB
3.
If it is necessary to adjust the output level of
each channel, press the CH.SEL button on the
remote.
Adjust the speaker output levels so that you can
hear the same sound level from each speaker
at the listening position. For the front left, front
right, center, surround left, surround right and
surround back speakers, the output levels can
be adjusted between –10 to +10 dB.
The subwoofer can be adjusted between –15
and +10 dB.
These adjustments result will be stored to 7.1
CH. INPUT memory.
4.
Adjust the main volume with the MAIN VOLUME
knob or the VOL buttons on the remote.
To cancel the 7.1 CH. INPUT setting, press the 7.1
CH INPUT button on the front panel or press 7.1 CH
IN on the remote.
Notes:
• When the 7.1 CH. Input is in use, you may not select
a surround mode, as the external decoder determines
processing.
• In addition, there is no signal at the record outputs
when the 7.1 CH. Input is in use.