Battery, Dwwhu, Qvhuw edwwhu – Siemens SL45i User Manual
Page 10: Kdujh edwwhu
 
14.9.01
U35gb.fm
U35 /SL45i- English, A31008-H4860-A1-1-7619
%DWWHU\
,QVHUW EDWWHU\
• Insert battery at the bottom of the
phone
n
and press inward until it
clicks into place
o
.
• Switch off the phone before you
remove the battery.
• Unlock battery
o
, then remove
n
.
&KDUJH EDWWHU\
• The battery is not fully charged
when delivered, so:
• Interconnect the socket and the
Sync Station
n
with the plug-in
power supply.
• Insert the phone into the Sync
Station
o
and press downward
until it engages. The contact mes-
sage is displayed (alternatively: 
plug in power supply directly to 
the phone). 
n
o
o
n
The voltage indicated on the 
Sync Station must not be 
exceeded.
&KDUJLQJ
The charger heats up when used for long 
periods. This is normal and not dangerous.
5
When charging is in progress.
F
End of charging
An empty battery is fully charged after 
about 2 hours. Charging is only possible in 
an ambient temperature of 5°C to 40°C 
(the charge icon flashes as a warning when 
the temperature is 5°C above/below).
8VDJH WLPH
A fully charged battery provides 70 to 200
hours of standby time or 1½ to 5 hours of 
talk time. The standby times/talk times are 
average values; the actual values depend 
on the operating conditions (see table 
below).
Charge level display:
Fully
B
C D
Empty
charged
A beep sounds when the battery is nearly 
empty. 
Operation
carried out
Time
(min)
Decrease of 
standby time
Calling
1
30 - 60 min.
Playing music
30
20 - 30 h.
Display
backlight*
½
30 min.
Network search
1
5 - 10 min.
*Key input, games, organiser etc.