Store control code, Gguhvverrn, 6wruh frqwuro frgh – Siemens SL45i User Manual
Page 24
 
14.9.01
U35gb.fm
U35 /SL45i- English, A31008-H4860-A1-1-7619
$GGUHVVERRN
0RYH VWRUDJH ORFDWLRQ
An entry may be moved to other 
storage locations:
6,0
Address entries on the SIM card 
only take the form of last name and 
phone number.
0RELOH SKRQH PHPRU\
p
Address entries only take the form 
of last name, first name and phone 
number.
If the SIM card is full, further entries 
are automatically kept in the 
memory.
3URWHFWHG 6,0
*
Part of the SIM memory can be pro-
tected by PIN 2. Depending on the 
SIM card, dialling can be limited to 
these phone numbers. For editing, 
PIN 2 is needed (see p. 63).
6WRUH FRQWURO FRGH
You can store phone numbers and 
control codes (digits) in the 
Addressbook as standard 
Addressbook entries (for operating 
an answering machine by remote 
control, for example).
+
Dial number.
Hold down until “+“ 
appears on the display 
(pause for connection 
setup). 
_
+
Enter control code (digits).
If necessary enter other 
pauses of three seconds 
each to ensure correct 
processing at the 
destination. 
Press and enter a name 
and, if necessary, further 
details.
6DYH
Save entry.
You can also store the control code 
(digits) like a phone number and 
send it during a call (see p. 17).
([WHQGLQJ QXPEHUV
Using an external PC program such as 
Microsoft®Outlook®, parts of a number 
can be replaced by “?”and can then be 
transferred to the Addressbook 
(for company numbers for example).
To call:
7
Open Addressbook and select 
(partial) number.
"
Press.
+
Replace “?” with digits.
"
Dial
number.
6\QFKURQLVLQJ ZLWK 2XWORRN®
You can synchronise your Addressbook with 
your Outlook
database using Siemens
QuickSync software (see p. 75).