Accept call, End call, Reject call – Siemens SL45i User Manual
Page 16: Accept call end call reject call, 0dnlqj d skrqh fdoo, Ffhsw fdoo, Qg fdoo, 5hmhfw fdoo
 
14.9.01
U35gb.fm
U35 /SL45i- English, A31008-H4860-A1-1-7619
0DNLQJ D SKRQH FDOO
$FFHSW FDOO
The phone must be switched on to 
receive calls (in standby mode).
or, if call divert is set:
accept a call with:
"
RU
$QVZHU
or with
'LYHUW
divert the call.
(QG FDOO
4
Press.
5HMHFW FDOO
4
RU
5HMHFW
The caller hears the busy signal.
'LYHUW
Diverts, say, to the mailbox, if 
this diversion has been set, see 
p. 57.
_
$QVZHU
5HMHFW
,
$QVZHU
'LYHUW
$FFHSWLQJ ZLWK VWHUHR KHDGSKRQHV
If a call comes in, the music is automatically 
interrupted. Press the PTT key to accept the 
call or to end the call (see p. 26).
$FFHSWLQJ ZLWK $QVZHUPHVVDJH
You must have recorded and activated an 
Answer.message.
When a call comes in, press the dictation 
key 
EULHIO\. The call is accepted and an
Answer.message is played without your 
having to speak (see also p. 30).
The numbers of calls that have been 
received and missed are stored for call 
backpurposes, see p. 51.
You can also press any key to accept a call, 
for the setting, see "Any key answer", p. 59.
An incoming call will interrupt any other use 
of the phone.
For data calls and fax calls see p. 72.
For functions during the call 
see p. 15.
Switch off the ringer for the current call:
Hold down.
The call is displayed. The caller 
hears the dialling tone.