Siemens SL45i - Manual (Page 14)

14.9.01 U35gb.fm U35 /SL45i- English, A31008-H4860-A1-1-7619

0DNLQJ D SKRQH FDOO
'LDOOLQJ ZLWK GLJLW NH\V
The phone must be switched on
(standby mode).
+
Enter the number
- if necessary with interna-
tional dialling code
- national only for calls to
the national fixed network.
&OHDU A short press clears
the last digit, a long press
clears the entire number.
Store phone number
in the Addressbook, see
p. 18.
"
Press the Call key. The
phone number displayed
is dialled.
(QG FDOO
4
Press the End key. The call
is ended.
Press this key even if the person on
the other end of the line has hung up
first.
,QWHUQDWLRQDO GLDOOLQJ FRGH
You can access international dialling codes
stored in your phone:

Press the key until a “+“ symbol
appears.
/LVW Press.
Select the required country from the list.
The international dialling code is displayed.
Now add the national number (in many
countries without the first digit if it is a zero)
and press the Call key.
6WHUHR KHDGSKRQHV
Plug in the stereo headphones at the
bottom of the phone. With the PTT key you
can use the functions “answer call, end call
” and in standby mode you can use voice
dialling (see p. 24).
If there is a call, the music is automatically
interrupted. Press the PTT key on the
headset cable to accept the call (see p. 26).
Warning:
Both earpieces must never be used when
driving or operating machinery.
Microphone
PTT key