Replacing the remote control battery, Handling discs – Insignia INSIGNA NS-C5112 User Manual

Page 11

Advertising
background image

9

Insignia NS-C5112 CD Car Deck with HD Radio Receiver

www.insignia-products.com

3 Use an alcohol swab to gently clean the

connector on your car deck and the front
panel. Be careful not to damage the
connector.

Replacing the remote control battery

The replacement battery should be a button cell
(CR2025) battery.

To replace the remote control battery:

1 While pressing the release latch, gently pull

the battery holder out of the remote control.

2 Remove the old battery, then place the new

battery into the holder with the + side facing
up.

3 Slide the battery holder into the remote

control.

Battery precautions

Always keep batteries out of the reach of
children. If a battery is swallowed, contact a
doctor immediately.

To ensure the best performance, clean the
battery with a dry cloth before you install it.

Make sure that the + side of the battery is
facing up.

Do not touch the battery with a metal object,
such as tweezers, because you may cause
an electrical short.

Handling discs

A dirty, scratched, or warped disc may cause
skipping or noise.

To care for discs:

Hold discs by their edges.

Store discs in their cases when you are not
using them.

Do not expose discs to direct sunlight, high
humidity, high temperature, or dust.
Prolonged exposure to extreme
temperatures can warp discs.

Do not stick labels or tape on discs.

Caution

Do not touch the connector with your finger or
a metal object. You may damage the
connector.

Connector

Connector

Warning

Incorrect handling of the battery could
result in an explosion.

The battery cannot be recharged.

Do not try to disassemble a battery.

Do not throw the battery into a fire;

Advertising