Insignia INSIGNA NS-C5112 - Manual (Page 7)

5
Insignia NS-C5112 CD Car Deck with HD Radio Receiver
www.insignia-products.com
2 If necessary, bend the mounting claws out to
ensure a tight fit.
3 Install the outer trim.
4 Slide your car deck into the mounting sleeve.
Side screw mounting
The following graphic shows the screw hole
locations on the side of your card deck.
To install using the side screw mounting
method:
1 Remove the hooks from both sides of your
car deck.
2 Remove the brackets from your car deck.
3 Align the screw holes on the sides of your car
deck with the screw holes in the vehicle’s
mounting bracket, then tighten the screws.
Removing your car deck
To remove your car deck:
1 Remove the front panel. For more
information, see “Removing the front panel”
on page 4.
2 Remove the outer trim.
Fire wall