Insignia INSIGNA NS-C5112 - Manual (Page 9)

7
Insignia NS-C5112 CD Car Deck with HD Radio Receiver
www.insignia-products.com
Resetting your car deck
You need to reset your car deck when:
•
You first install it.
• You replace the vehicle’s battery.
• You see errors on the LCD.
To reset your car deck:
•
Open the front panel, then press RESET.
Using the radio
Selecting the radio band
To select the radio band:
1 Make sure that you are in radio mode.
2 Press BND one or more times to select the
radio band. You can select F1, F2, F3, A1, or
A2. F1 through F3 are FM bands. A1 and A2
are AM bands
Automatically tuning a radio station
To automatically tune a radio station:
1 Make sure that you are in radio mode.
2 Briefly press or on the remote control
or or on your car deck. AUTO
appears on the LCD, and your car deck
scans for the next station with a signal.
Manually tuning a radio station
To manually tune a radio station:
1 Make sure that you are in radio mode.
2 Press and hold or on the remote
control or or on your car deck.
MANUAL appears on the LCD.
3 Briefly press and release or on the
remote control or or on your car deck
one or more times to tune to the station you
want.
Automatically scanning for stations
To automatically scan for stations:
1 Press SCAN. Your car deck scans for a
station with a signal, then plays five seconds
of the station before it goes to the next
station.
2 When you hear the station you want to play,
press SCAN again.
Storing stations
You can store as many as six stations per radio
band.
To memorize stations:
1 Make sure that you are in radio mode.
2 Select the radio band that has the station you
want to store.
3 Tune to the station you want to store.
4 Press AMS on the remote control or a preset
number button (1 through 6) on your car deck
for more than three seconds. The station is
stored in memory.
Scanning stored stations
You can scan stored stations. Your car deck
plays five seconds of each stored station before
going to the next stored station.
To scan stored stations:
1 Make sure that you are in radio mode.
2 Select the radio band that has the stored
stations you want to scan.
3 Press AMS on the remote control to start the
scan. You car deck plays five seconds of
each stored station before going to the next
stored station.
4 When you hear the station you want to play,
press AMS again.
Turning digital (HD) stations on or off
To turn digital (HD) stations on or off:
1 Make sure that you are in radio mode.
2 Press and hold HD until the LCD displays
HD-S ON or HD-S OFF.
When HD-S ON is displayed on the LCD,
tuning and scanning for stations occurs on
the digital band.
Using the CD player
Playable discs
Your car deck can play the following discs:
Playing a CD
To play a CD:
1 Make sure that you are in CD playback
mode.
2 Press REL on your car deck to open the front
panel.
3 Insert a CD with the label side up onto the
CD slot. The CD starts playing automatically.
Note
When you reset your car deck, the clock setting
and other memorized functions are erased.
Note
You can only scan for stations with the remote
control.
Note
You can only scan for stored stations with the
remote control.
Disc
type
Label Format Size
CD Audio 12 cm
MP3
MP3
Audio 12 cm