Ikelite ALL - Manual (Page 13)

13
Troubleshooting
Water enters the
housing - Remove, clean and properly lubricate the main
o-ring.
- Look for hairs, dirt, or foreign debris crossing the
o-ring seal.
- Reassemble the housing without a camera
installed and pressure test or take diving.
- Return housing to Ikelite for routine maintenance.
Problem Solution
Pictures are too blue
or too green
- Use custom (manual) white balance if available.
- Add an optional color correcting filter.
- Add an external strobe.
- Move in closer to your subject when taking a
picture.
- Lightly lubricate main housing o-ring, see page 9.
- Make sure that the camera is installed correctly. Housing is hard to
close
- Install a fully charged battery.
- Make sure the housing zoom control is centered
and not engaged.
- There is not enough available light for the camera
to properly focus. Add a focusing light or strobe
with a built-in focusing light to your system.
- Select macro mode when shooting close-ups.
Camera does not
take a picture