Ikelite ALL - Manual (Page 15)

15
Push buttons or
controls are sticky
and hard to operate - Remove the camera and rinse the closed housing
in freshwater. Vigorously press each push button
in and out several times to release any trapped
saltwater or debris.
- If a control is sticky, grab the control knob, pull it
out, and then push back in.
- Return housing to Ikelite for routine maintenance.
Problem Solution
Recommended Accessories
A full range of accessories is available to support your housing. Please
visit www.ikelite.com to see the most current information about
recommended accessories.
Tray and Handle(s)
Add stability and gripping point(s) for comfortable use of the housing
above and below water. Some tray and handles offset the slightly
positive buoyancy of the housings. Handles offer attachment points for
external lighting systems.
Spare Parts
Main Housing O-ring ..............................0132.45
Replacement Lanyard ............................0321.10
Replacement Vinyl Port Cover ................0200.02 (2.2” port)
................................................................0200 (3.0” port)
................................................................0200.08 (3.9” port)
Ikelite Lube ..............................................5020 (4 - 1cc tubes)
For light lubrication of the main housing o-ring.