Intel ESM-2850 2047285001R User Manual

Page 21

Advertising
background image

User’s Manual

ESM-2850 User’s Manual

21

Locate the DIMM socket on the board.

Hold two edges of the DIMM module carefully. Keep away of touching its connectors.

Align the notch key on the module with the rib on the slot.

Firmly press the modules into the socket automatically snaps into the mounting notch.

Do not force the DIMM module in with extra force as the DIMM module only fit in one

direction.

To remove the DIMM modules, push the two ejector tabs on the slot outward

simultaneously, and then pull out the DIMM module.

Note:

(1) Please do not change any DDR2 SDRAM parameter in BIOS setup to increase

your system’s performance without acquiring technical information in advance.

(2) Static electricity can damage the electronic components of the computer or

optional boards. Before starting these procedures, ensure that you are

discharged of static electricity by touching a grounded metal object briefly.

Mounting Notch

Notch Key

Ejector

200-pin DDR2 DIMM

Advertising