Intel ESM-2850 2047285001R - Manual (Page 45)

User’s Manual
ESM-2850 User’s Manual 45
Item Options Description
Panel Number
640x480 18, 800x600 18,
1024x768 18, 1280x1024 36
1400x1050 36, 1600x1200 36
1280x768 18, 1680x1050 36
1920x1200 36, 1024x768 18
1024x768 36, 1280x800 18
1280x600 18
Select Panel Resolution that will be displayed
depending on the LCD Panel (LFP)
TV Standard
Off
NTSC
PAL
SECAM
Select the output mode of TV Standard
TV Format
Auto, NTSC_M,
NTSC_M_J, NTSC_433,
NTSC_N, PAL_B,
PAL_G, PAL_D,
PAL_H, PAL_I,
PAL_M, PAL_N,
PAL_60, SECAM_L,
SECAM_L1, SECAM_B,
SECAM_D, SECAM_G,
SECAM_H, SECAM_K,
SECAM_K1
This item allows you to select different TV
signal format when the TV Standard item is not
off.
3.5.1.2 IDE Adapter Setup
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each
hard disk drive. The below Figure will shows the IDE primary master sub menu.
Use the following table to configure the hard disk.
Item Options Description
IDE HDD Auto-detection Press Enter
Press Enter to auto-detect the HDD on
this channel. If detection is successful,
it fills the remaining fields on this
menu.
IDE Channel 0 Master
IDE Channel 0 Slave,
IDE Channel 1 Master,
IDE Channel 1 Slave
None
Auto
Manual
Selecting ‘manual’ lets you set the
remaining fields on this screen.
Selects the type of fixed disk. "User
Type" will let you select the number of
cylinders, heads, etc. Note:
PRECOMP=65535 means NONE !
Access Mode
CHS
LBA
Large
Auto
Choose the access mode for this hard
disk
The following options are selectable only if the ‘IDE Channel …’ item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this
hard disk.
Head
Min = 0
Max = 255
Set the number of read/write heads
Precomp
Min = 0
Max = 65535
**** Warning: Setting a value of 65535
means no hard disk
Landing zone
Min = 0
Max = 65535
****
Sector
Min = 0
Max = 255
Number of sectors per track