IBM SG24-4817-00 - Manual (Page 222)

This soft copy for use by IBM employees only.
-- ATM ports
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
This table provides the list of ports attached to
the ATM switch (ATM ports). These ports belong to ATM modules
inserted in slots that are attached to the ATM switch.
″
::= { physical 3}
portEntry OBJECT-TYPE
SYNTAX PortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
″
Entries of portTable. Each entry corresponds to a port that
belongs to an ATM module. This module must be inserted in a
slot that is attached to the ATM switch.
″
INDEX { portSlotIndex,
portIndex }
::= { portTable 1 }
PortEntry ::= SEQUENCE {
portSlotIndex
INTEGER,
portIndex
INTEGER,
portInterface
INTEGER
}
portSlotIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The slot number of this port
′
s module.
″
::= { portEntry 1 }
portIndex OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The port number for this module.
″
::= { portEntry 2 }
portInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
″
The interface number of this port.
″
::= { portEntry 3 }
-- ATM interfaces
206
ATM Workgroup Solutions: Implementing the 8285 ATM Switch