Intermec PX4I - Manual (Page 121)

EasyCoder PX4i User’s Guide (IPL version) 107
Appendix B — Media Specifi cations
Tickets with Black Mark
⇐ a ⇒ Media Width
Maximum: 120 mm (4.72 inches)
Minimum: 25 mm (1.00 inches)
⇐ b ⇒ Copy Length
Maximum: 6,143 mm (241 inches)
provided there is a suffi cient amount of free SDRAM memory
Minimum: 20.0 mm (0.8 inches)
⇐ c ⇒ LSS Detection Position
Variable, see Chapter 11.
⇐ d ⇒ Black Mark Width
Maximum: Full media width
Recommended: 10.0
mm (0.39 inches)
Minimum: 5.0 mm (0.20 inches)
⇐ e ⇒ Black Mark Length
Maximum: 25.0 mm (0.98 inches)
Recommended: 3.2 mm (0.13 inches)
Minimum: 1.27 mm (0.05 inches)
⇐ f ⇒ Black Mark Y-Position
It is recommended that you place the black mark as close to the front
edge of the ticket as possible. The black mark can be placed either on the
top or at the back of the media.
Black Mark Characteristics
Maximum refl ectance: 15%, 940 nm
Difference between mark and media: 55%
Media Type Setup
• Ticket (w mark)
Note: Do not allow any perforations to break the edge of the
media as this may cause the media to split and jam the printer.