User administration, 1 create a new user, 2 change user configuration – Infinite Peripherals SCOM-100 User Manual
Page 22: 3 delete a user, 4 defining specific alarm recipients
SCOM-100, User guide
22
5. User administration
Up to 20 SMS users can be declared in a user list for an SCOM-100 unit. Only
declared users can interact (send, receive SMS) with the unit.
SCOM-100 features three user privileges reflecting different user rights. For each user
the following privilege flag can be configured:
1. User administration. A user has the right for user administration (Create, Delete,
Set privileges) or not.
2. Device configuration. A user has the right to configure the SCOM-100 device or
not.
3. Alarm SMS recipient. A user can be an SMS alarm recipient or not.
5.1 Create a new user
The device accepts the command only if it is issued by users who have the
administration privilege.
0500,id,n,p,c1,c2,c3
0500: Command
ID
id:
User ID (1-20)
n:
User name (0-15 characters)
p:
Phone number (3-15 characters)
c1:
User administration privilege (0 for ‘No’ 1 for ‘Yes’)
c2:
Device configuration privilege (0 for ‘No’ 1 for ‘Yes’)
c3:
Alarm SMS recipient (0 for ‘No’ 1 for ‘Yes’)
c4:
M2M user: the user is another SCOM device (0 for ‘No’ 1 for ‘Yes’)
5.2 Change user configuration
A user with the user administration privilege can use this command to edit other user
privileges.
0502,id,c1,c2,c3
0502: Command
ID
id:
User ID (1-20)
c1:
User administration privilege (0 for ‘No’ 1 for ‘Yes’)
c2:
Device configuration privilege (0 for ‘No’ 1 for ‘Yes’)
c3:
Alarm SMS recipient (0 for ‘No’ 1 for ‘Yes’)
c4:
M2M user: the user is another SCOM device (0 for ‘No’ 1 for ‘Yes’)
5.3 Delete a user
A user with the user administration privilege can use this command to remove a user
from the user list.
0501,id
0501: Command
ID
id:
User ID (1-20)
5.4 Defining specific alarm recipients
Special commands are available for defining a subset of the user list as SMS recipients for
each alarm.