Infinite Peripherals SCOM-100 - Manual (Page 29)

SCOM-100, User guide 29
If a connection is established the answer is ‘OK’. If you don’t see your typed
characters, give the following command to enable character echoing:
Ate1
All configuration commands can be passed to the unit from the Windows
HyperTerminal. The command structure is the same to that of the SMS commands,
except the fact that they are embedded in an overall ‘atsms’ command.
Example:
The SMS command:
1100,0,1,Door contact,3,30
for digital input configuration can be given via the terminal as:
atsms=”1100,0,1,Door contact,3,30”
All device responses are routed to the terminal’s screen.
7.2.2 Using the WA Manager for configuration
The WA Manager is a Windows application for convenient configuring and
commissioning the SCOM-100 unit. See the WA Manager manual for more information.