Intermec 6620 - Manual (Page 81)

SECTION 3 6620 Recovery Procedures
6620 Hand-Held Computer Technical Reference 3-19
3. Click the OK button on the “Recovery Utility” warn-
ing, if it is displayed (page 3-7), to continue.
4. Use the applicable Browse buttons to ensure the
source volume is the CD-ROM and that the destina-
tion is your card to be imaged via the “Image to Mini-
mum Load” window. Click the Image Minimum
Load button to continue. The card will be formatted.
5. Press “Y” for “Yes” to format the PC Card and copy all
“Minimal Load” files.
Using this process, you may format any size ATA Flash
disk, with a minimum of 40 MB for storage. The drive ge-
ometry does not matter when preparing an image as long as
the card can contain the Boot Card Load.