Intermec 6620 - Manual (Page 90)

SECTION 3 6620 Recovery Procedures
3-28 6620 Hand-Held Computer Technical Reference
Operations
These are the various program options in the
PARTUTIL.EXE file and how and why to use them. You
can view the source code by typing “partutil /?” from
the DOS prompt. The general syntax for command line pa-
rameters is partutil.exe drive /arg1 /arg2 /arg3
" NOTE: All command processing is done from left to right.
Drive: (as seen by INT13 services) 80, 81, etc. (Defaults
to 80 or C:\ )
EXAMPLE: Partutil 81 /I D:\ = 81 thus use “81” not “D:\”
Options
/Q Silent mode (no prompts or additional text)
/X Create the main data partition
/J Delete the main data partition
/U Create the extended partition
/O Delete the extended partition
/T [!] [sectors] Create recovery partition, optional # sectors
/Y
Delete the recovery partition
/C <size> Create the suspend-to-disk partition
(size is in megabytes, see example).
EXAMPLE: Partutil /C 35 creates 35 MB suspend to disk partition.
" NOTE: If you have a 48 MB RAM 6620 Computer, use a 52 MB partition.
The general recovery process creates a 52 MB partition.
/G Delete the suspend-to-disk partition
/Z Get INT13 drive information for specified device
/I Display partition information
/E Manually edit the partition information
/R Reboot system