IOGear GCS1784 - Manual (Page 21)

21
Advanced Configuration
Invoking Hotkey Setting Mode (Default)
1. Press and hold down [Num Lock] (the Clear key on MACs).
2. Press and release [-].
3. Release [Num Lock] (the Clear key on MACs).
To Toggle to or from the alternate Hotkey Setting Mode (HSM):
1. Press and hold down [Num Lock].
2. Press and release [-].
3. Release [Num Lock].
4. Press and release [H].
Invoking Hotkey Setting Mode (Alternate)
1. Press and hold down [Ctrl].
2. Press and release [F12].
3. Release [Ctrl].
NOTE: The term “invoke HSM” in the following table refers to the method chosen above