The firmware upgrade utility – IOGear GCS1784 User Manual
Page 30
30
31
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth, automated
process for upgrading the KVM switch’s firmware.
The Utility comes as part of a Firmware Upgrade Package that is specific for each device. New firmware
upgrade packages are posted on our Website as new firmware revisions become available. Check the
web site regularly to find the latest packages and information relating to them.
Before you Begin
To prepare for the firmware upgrade, do the following:
1. From a computer that is not part of your KVM installation ( disconnect the computer from the KVM)
go to our Internet support site and choose the model name that relates to your device (GCS1782)
to get Firmware Upgrade Packages.
2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and down-
load it to your computer.
3. Use the Firmware Upgrade Cable provided with this unit, to connect a COM port on your computer
to the Firmware Upgrade Port of your switch.
4. Shut down the computers on your CS1782 installation.
5. Invoke Firmware Upgrade Mode.
The front panel LEDs flash together to indicate Firmware Upgrade Mode is in effect.
The Firmware Upgrade Utility