IBM PS1500 - Manual (Page 112)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5•24 User Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Restore Preset
RESTORING THE ORIGINAL PRESET SET-
TINGS
It is possible to cancel all modifications made to
the Presets and restore factory settings.
1. Press RESTORE in the SYSTEM section.
The RESTORE ORIGINAL BLOCK display
activates.
2. Press F5 or F6 to select the PRESET command.
The display shows “Restore Original Preset”.
3
ENTER ESCAPE
2
F1 F2 F3 F4 F5 F6 F7 F8
1/1 RESTORE ORIGINAL BLOCK [Release]
All Seq Preset [01-09-97]
RESTORE ORIGINAL " PRESET "
Are you sure? Press [ENT] or [ESC]
1 RESTORE
1/1 RESTORE ORIGINAL BLOCK [Release]
All Seq Preset [01-09-97]
3. Press ENTER to confirm the Restore Preset pro-
cedure, or ESCAPE to cancel.
All the changes stored to the PROGRAMMA-
BLE PRESETS are cancelled. The original
ROM settings of all the Preset parameters
are restored.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Hint: If you want to cancel the entire contents of
RAM in a single operation, use the “Restore ALL”
command. Be sure, however, to save all data that
you wish to conserve to disk before confirming the
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
operation.