IBM PS1500 - Manual (Page 61)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Basic concepts 3•13
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Data Entry
Inserting numeric values, selecting options and
navigating between the PS1500 parameters of
the edit pages is achieved with specific controls:
• Navigation (Function Select buttons F1…F8),
Page+/Bank+, Page–/Bank– buttons.
• Data Entry (DIAL, Function buttons F1…F8,
Sliders F1…F8, Keyboard, ENTER and ES-
CAPE buttons).
NAVIGATING
Use the Function buttons to navigate from one
parameter to another in the Edit pages.
Selecting a parameter with the corresponding
Function button activates the parameter for a
change of value or status.
For example, you can change the Sound (Pro-
gram Change) assigned to the Tracks of a Pre-
set in Page 1 of «Edit Preset» by activating the
required track with the corresponding Function
button. The selected track starts to flash, indi-
cating that it is ready to accept a change.
In some cases, the location of a parameter cor-
responds to two (or more) function buttons: the
parameter can, therefore, be selected by one of
the corresponding Function buttons.
Use the Page+/Bank+, Page–/Bank– buttons to
pass from one edit page to another. Use the same
buttons to change Sound bank in Sound selec-
tion situations.
Data Entry
F1 F2 F3 F4 F5 F6 F7 F8
1/9 PRESET:PROGRAM [Bk2:STAND1 Tk01]
113 15 29 26 50 50 49 1
Preset: Program Change page showing Track 3 selected with F1
1/1 EDIT:HALL1 [REVERB VOLUME/dB]
Vol=127 RvTime=1.5 InDly=100 Filter=-12
F1 F2 F3 F4 F5 F6 F7 F8
Edit Hall (Reverb) page: Vol parameter can be selected by
either F1 or F2, RevTime by F3 or F4, etc..
1/9 PRESET:PROGRAM [Bk2:STAND1 Tk01]
113 15 29 26 50 50 49 1
2/9 PRESET:TRANSPOSER [Tk07]
00 00 00 00 00 00 +04 00
Use of the Page+/Bank+ and Page–Bank– buttons to change
edit page.
PAGE+ / BANK+
PAGE– / BANK–