IBM PS1500 - Manual (Page 37)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Quick guide 1•21
4. Press RECORD in the Sequencer.
On the top line of the Song/Style display ap-
pear the letters “MT” to indicate that the Met-
ronome is active. On the bottom line at the
center, the chord track is shown as being
active to record data by the indication
“Chord=Rec”. If you don’t want to play with
the metronome, press the METRONOME
button in the SONG EDIT section.
Recording a Song/Style
4
1 2 3
9 10 11 12
5 4
13
6
14 15
7 8
16
TRACK
SELECT
16 TRACK RECORDING STUDIO
DISK PLAY
ALL SONGS MEASURE
<< >> PLAY STOP RECORD
94 MT Free01 Mes=00 :1 Bk2SWORG :Tr08
MetalR Chord=Rec off off 19
5
PLAY
OR
INTRO
KEY START
CONTINUE
ENDING
START / STOP
5. Press either PLAY or START/STOP to start the re-
cording.
Pressing PLAY starts the sequencer to record
the keyboard track(s) only.
Pressing START/STOP starts the sequencer
to record the chords that trigger the auto ac-
companiments of the Style.
A metronome will beat time (drum sticks) and
you will have a one measure lead into the
recording to get ready.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
ᮣ Note: If you want to synchronize the start of
the recording with the keyboard tracks and
accompaniments, press KEY START and start to
play on the keyboard. Recording starts instantly
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
with no countdown into the recording.
6. Start playing after the one bar lead.
Any notes you play during the lead-in will not
be recorded.
During the recording, use the Style controls
as you would when playing a Style:
• Use the Fills;
• Change Variation;
• Change Style (even with a different Time
Signature - e.g. from 4/4 to 3/4), etc.....
6