IntraServer Technology ITIpci 5100G/GF - Manual (Page 23)

LSI Logic Corporation Page 23 of 56
________________________3
The ITI-5100G/GF Driver Software
A network device driver must be installed before the ITI-5100G/GF adapter
can be used with your systems. This chapter describes how to preform the
following tasks:
Install the driver software in the Solaris environment
Configure the host files
Configure driver parameters using the ndd utility
Installing the Driver Software
Note: The ITI-5100G/GF adapter must be physically installed in your
server prior to installing the driver software. See “Installing the ITI-
5100G-GF Hardware,” for details.
To install the adapter software for Solaris, perform the following procedure:
1. Become superuser (root).
2. Note the revision level of the Software Distribution Media included
with your IntraServer Technology adapter.
The revision level is stamped on the Software Distribution Media
label and is used in the commands below.
Place the Software Distribution Media into the CD-ROM drive.
Mount the CD-ROM on a local directory.
If the Volume manager (vold) is running on your machine, when the
ITI-5100G/GF CD-ROM is loaded into the drive, it is mounted
automatically under /cdrom/cdrom0
#volcheck
Access the package directory by entering the following:
# cd /cdrom/cdrom0