Intel MD566X - Manual (Page 55)

56K V.92 Data, Fax, and Voice Chipset
Programmer’s Guide Intel Confidential 55
-Cn 0
Generate Data Modem Calling Tone: This command allows the DTE to select
whether the modem sends a 1300-Hz calling tone or V.8 calling tone when originat-
ing a data modem connection.
n = 0** Calling tone disabled
n = 1 1300-Hz calling tone sent for all data modem connections
n = 2 V.8 calling tone sent for V.34 modulation and 1300-Hz calling tone
sent for all other modulations
+GMI? none
Identify Modem Manufacturer: This command causes the DCE to send a message
to the DTE indicating the DCE manufacturer. This command is identical to AT+FM-
FR? and AT+FMI?.
AT+GMI?
Intel Corporation
OK
+GMM? none
Identify Product Model: This command causes the DCE to report the modem
chipset name. This command is identical to AT+FMDL? and AT+FMM? commands.
AT+GMM?
MD56xx
OK
+GMR? none
Identify Product Revision: This command causes the DCE to report the modem
chipset revision level. This command is identical to AT+FREV? and AT+FMR?.
AT+GMR?
CD08.55-612 (10/19/99) PARALLEL-SPEAKERPHONE O5
OK
Table 3-4. Data Mode Command Descriptions (Continued)